IONFIX Pro Electrostatic Generator

Using Electrostatics for temporary adhesion is a rapidly growing are of industry. It replaces adhesives and vacuums in laminating, interleaving, labelling, bagmaking, printing, in-mould labelling and many other areas.

Fraser have designed the IONFIX range to supply greater control and safety in a compact, cost-effective package.

The IONFIX Pro is a 150 W Static Generator with 30 kV or 60 kV variants. Typical applications where this high power is essential include high speeds, non-stop winding, for holding stacks of materials together, and also pinning laminated worktops before being heat processed.

With local and remote monitoring as well as the option for fieldbus connectivity, the IONFIX Pro has been designed for full integration into machinery and production processes. It has exceptional reliability, three levels of safety and a control interface that is quick and easy to use.

CategoryAntistatic Solutions

Product TypeStatic Generators and Charging Electrodes

Technical Datasheet

IONFIX Compact Electrostatic Generator

  • The IONFIX Compact is a 30 kV, 20 W generator.
  • Delivers a full 20 W of power from 20 kV up to 30 kV.
  • AC input models: 90 – 250 V AC, 50/60 Hz, IEC 320 C14 inlet
  • DC input models: 24 V DC. Combicon or M12 connector.
  • Available in positive or negative polarities.
  • IML variants – output voltage limited to 20 kV. Compatible with the full range of Fraser IML accessories.
  • Four HV output connections.

CategoryAntistatic Solutions

Product TypeStatic Generators and Charging Electrodes

Control Interface

  • The control interface gives the operator complete control of the functions of the IONFIX Compact.
  • On / Off switching of the high voltage.
  • High voltage setting and adjustment.
  • Remote sensing of actual output voltage and current for easy display.
  • Constant current mode with fully adjustable current limitation.

Remote Monitor

  • A remote monitoring system checks the High Voltage output status of the Generator.

Reliability

  • Short-circuit and arc protected output.
  • Rugged mechanical enclosure for wall or bench mounting.

Safety

  • Multiple levels of protection for market-leading safety in operation.
  • UL certified.

Technical Datasheet

7093 Edge Pinner

The 7093 has been specifically designed to allow accurate, high performance edge pinning on film using Fraser market leading static Generation systems.

The 7093 is used to pin plastic film, such as in neck-in applications in cast film production.

    • Adjustable tips allow easy installation in a range of applications.
    • Precise static generation exactly where it is needed.
    • Robust construction ensures long life.
    • Easy to install.
    • Stay-sharp emitters, easily replaceable.

CategoryAntistatic Solutions

Product TypeStatic Generators and Charging Electrodes

Technical Datasheet

7090 – 7095 Static Pinners

Fraser offers two types of electrode for electrostatic charging of small areas and pinning.

They are used for neck-in applications on cast film lines, edge pinning of films, in-mould labelling and other areas where temporary adhesion of two materials is required.

  • Easy to use static generation electrodes for use throughout industry.
  • Choice of two models: the compact 7090 and the wider 7095.
  • High voltage is resistively coupled with inline 100MOhm resistance for safe and spark free operation.
  • The high voltage terminations and resistors are encapsulated to ensure a longer life than unpotted competitive models.
  • HT cable protected by nylon conduit.

CategoryAntistatic Solutions

Product TypeStatic Generators and Charging Electrodes

Technical Datasheet

7130 – 7150 Charging Electrodes

The 7130 – 7150 Charging Electrodes are static generation Bars which provide a safe, controllable, reliable and cost-effective method of applying static charge for temporary adhesion in industry.

Robust charging electrodes to meet the temporary adhesion requirements of high performance machinery.

  • Tungsten emitters for a long, trouble-free life. Up to 4 x the life of non-tungsten emitters.
  • The emitters are spaced at 10mm pitch for an even application of static charge, without the striping effect common with wider spaced emitters.
  • The emitters are resistively coupled to the HV for safe, non-sparking performance. Each emitter has an individual HV resistance to the high voltage.
  • Compact size with rigid construction. Available in lengths up to 4000mm.
  • Easy installation plastic mountings which slide in the T slot at the base of the Bar are supplied.
  • Flexible cable in protective nylon conduit.
  • Standard and optional models available – please see datasheet.

CategoryAntistatic Solutions

Product TypeStatic Generators and Charging Electrodes

Technical Datasheet

7080 – 7081 Static generator bars

The 7080 & 7081 Generator Bars provide a safe, controllable, reliable and cost-effective method of applying static charge for temporary adhesion in industry.

Fraser Static Generators provide improved productivity in a range of industrial applications including interleaving steel sheets, pinning plastic sheets and webs, bag making, wrapping machines and other areas of temporary adhesion.

  • The emitters are spaced at 10mm pitch for an even application of static charge, without the striping effect common with wider spaced emitters.
  • The 7080 Bar has emitters which are resistively coupled to the HV for safe, non-sparking performance.
  • Compact size with rigid construction. Available in lengths up to 3000mm.
  • Easy installation – with M8 x 60mm nylon studs sliding in the T slot at the base of the 7080 Bar.
  • Flexible cable in protective nylon conduit.

The only difference between 7080 & 7081 Bars is that:

  • 7080 – has connector for obsolete 7330 & 7324 Generators.
  • 7081 – has connector for current 30kV models (7333, 7360 & 73150 Generators).

CategoryAntistatic Solutions

Product TypeStatic Generators and Charging Electrodes

Technical Datasheet

EX715 Static Meter

The EX715 Static Meter has been developed to investigate industrial static electricity problems and has been certified for use in hazardous areas.

The EX715 meter can show where and how the static electricity is generated, its magnitude and its polarity. This gives the engineer a scientific basis for analysis.

  • The EX715 is certified for use in hazardous area Zones 1 and 2.See datasheet for details of ATEX and IECEx certification.
  • The EX715 measures static electricity on the surface of a material, at a distance of 100mm.
  • The EX715 monitors the effectiveness of the action taken to solve the problem. If the solution involves static control equipment, the EX715 shows its most effective position.
  • Hold facility to freeze the reading on the LCD.

CategoryAntistatic Solutions

Product TypeEX - Hazardous Area Products

Technical Datasheet

EX1250 Static eliminator bar

The EX1250 Bar is a high performance static eliminator with ATEX certification for use in hazardous areas.

Maximum ionisation performance in a hazardous area.

  • The EX1250 is part the Fraser 1250 family of static eliminators, which offer market-leading reliability and performance.
  • Stay-sharp etched emitters for better long term performance. Life 5 years +. Non-infectious.
  • Emitters at 15mm pitch provide more ionisation and so better neutralisation.
  • Robust construction, but compact and easy to install.
  • Operating distance up to 150mm. Best distance for high speeds and high charges 25mm – 50mm.
  • Washable and suitable for food, medical and pharmaceutical applications.
  • All electronic components are fully encapsulated for maximum reliability.
  • Certified for Zones 1, 2 and 22. Gas group IIB (ethylene).

CategoryAntistatic Solutions

Product TypeEX - Hazardous Area Products

Technical Datasheet

EXHPSD Static dischargers

EXHPSD static dischargers are among the most powerful anti-static tools available. Now they have been ATEX certified and so are available for use in hazardous areas.

Unrivalled cost-effectiveness in hazardous areas. The low cost does not mean low performance.

  • High Performance without compromise.
  • Particularly effective on high speeds and high charges.
  • Non-contact application. The fibres do not need to touch the material they should be at a distance of about 2.5mm.
  • Solvent resistant construction allowing them to resist aggressive chemicals and even to be washed in the solvent, to remove ink, coating and other contaminants.
  • Used by coaters, gravure printers and laminators worldwide.

CategoryAntistatic Solutions

Product TypeEX - Hazardous Area Products

Technical Datasheet

406/7 – 409/11 Anti-static tape brushes

Fraser Tape Brushes are used on paper and plastics handling equipment, marking, labelling and coding machines.

Powerful anti-static brushes that are easy to use and install.

  • These brushes have a large number of highly conductive, soft stainless steel filaments with a diameter of 12μ.
  • The fine tips of these fibres concentrate the electric field of the static charge and ionise the surrounding air.
  • This ionised air produces ions of the opposite polarity to neutralise the static charge.
  • The tape brushes have a conductive adhesive on the tape body. This is used to stick the Tape Brush to a conductive and grounded part of the machine. No other fixing is required.
  • The versatility of Fraser Tape Brushes allows them to be formed into non-linear shapes, as required.
  • Available in two standard sizes Models 406/7 and 409/11.

CategoryAntistatic Solutions

Product TypeEX - Hazardous Area Products

Technical Datasheet